Skip directly to content

PowerMAX™ 365 Series

 

UV-A LED Panel Flood Lamps

 

Designed Specifically for NDT Professionals!

 

 

PowerMAX™ 365 Series flood lamps feature a panel of 16 powerful UV-A (365 nm) LEDs specially engineered for non-destructive testing applications.
These versatile, stationary light sources can be installed overhead or in-line, and can be ganged together to provide an even wider coverage area.

 

Available in FOUR MODELS to meet your specific inspection needs:

 

STANDARD INTENSITY MODELS (with and without blacklight filters):

 

1) The RRES 90061 and ASTM E3022 compliant PM-1600SBLC Model with a blacklight filter and a maximum UV-A intensity of 4,500 μW/cm2 at 15 inches (38 cm)– found here http://www.spectroline.com/pm-1600sblc-ndt

2) The PM-1600 UV, which comes with a clear filter and a maximum UV-A intensity of 4,500 μW/cm2 at 15 inches (38 cm)

HIGH INTENSITY MODELS (with and without blacklight filters):

3) The PM-1600UVH is equipped with a clear glass filter and provides a nominal steady-state UV-A intensity of 8,000 μW/cm2 at 15 inches (38 cm).

4) The PM-1600BLH is equipped with a black light filter that reduces the output of wavelengths longer than 400 nm. It provides a nominal steady-state UV-A intensity of 6,500 μW/cm2 at 15 inches (38 cm).

 
 
Features:
 
  • Choice of two high-intensity models with a nominal steady-state UV-A intensity as high as 8,000 μW/cm2 or two standard-intensity models with a maximum UV-A intensity of 4,500 μW/cm2 at 15 inches (38 cm)
  • Large coverage area of 15 inches by 6 inches (38 cm x 15 cm), with a minimum UV-A intensity of 2,000 μW/cm2
  • Low visible light emission – less than 2 foot-candles (22 lux)
  • Easily mountable for overhead inspection or in-line applications
  • Built-in fans keep LEDs cool to maintain optimum light output during extended use
  • Meets ASTM UV-A intensity and wavelength specifications for FPI and MPI
  • Customizable! Multiple lamp units can be “ganged” together longitudinally or back-to-back for a larger coverage area to meet your specific inspection requirements
  • Both high- and standard-intensity versions available with or without black light filter
  • Standard-intensity lamps (PM-1600UV, PM-1600SBLC) meet ASTM UV-A intensity and wavelength specifications for LPT and MPT, and come with a certificate of compliance for both wavelength and output measurements

 

High-Intensity Models

 

PowerMAX™ 365 Series UV-A LED panel flood lamps are available in two high-intensity models that are specifically designed for NDT inspection applications requiring high UV-A output.
 
The PM-1600UVH is equipped with a clear glass filter and provides a nominal steady-state UV-A intensity of 8,000 μW/cm2 at 15 inches (38 cm).
 
The PM-1600BLH is equipped with a black light filter that reduces the output of wavelengths longer than 400 nm. It provides a nominal steady-state UV-A intensity of  6,500 μW/cm2 at 15 inches (38 cm).
 

 

UV-A Beam Profile
 


 
 

Standard-Intensity Models

 

PowerMAX™ 365 Series UV-A LED panel flood lamps are also available in two standard-intensity models that are designed for NDT inspection applications requiring limited UV-A output. Both versions address aerospace industry concerns.
 
The PM-1600UV is equipped with a clear glass filter and provides a nominal steady-state UV-A intensity of 4,500 μW/cm2 (maximum) at 15 inches (38 cm).
 

UV-A Beam Profile

 
 

Typical wavelength output profile of PowerMAX™ 365 Series with and without black light filter.

 
 
As the wavelength of the PowerMAX™ 365 moves into the visible light range,
the black light filter significantly reduces the output of the lamp at 400 nm.
 
 
 

Easily Expandable!

 
For applications requiring extremely large coverage areas, the PowerMAX™ 365 can be quickly ganged together
longitudinally (left) or back-to-back (right) using customized, easy-to-install connecting plates and brackets.

ASTM E3022 scope covers the performance requirements of LED (UV-A) lights used in MT/PT procedures.

These tests are intended to be performed only by the manufacturer to certify performance of specific lamp models.
 
Spectroline® certifies the performance of specific lamp models with rigorous in-house development and testing as per ASTM E3022.
 
These lamp models are shipped with fully serialized Certificates of Conformance that include the following
 
1) DATA: Emission spectrum measurements; temperature tests; lamp output, including UV intensity visible reading
2) SCANS: Filter transmittance curve; peak wavelength
3) IMAGES: Irradiance pattern; beam pattern
 
Retrofit/Upgrade to ASTM E3022 on previously purchased lamps purchased after 1/1/2013:
If your lamp was purchased without a Certificate of Conformance, it may be eligible to be upgraded to ASTM E3022.  Previously purchased lamps in the field may be required for a return and retrofit/upgrade in order to meet ASTM E3022 compliances.
 
CLICK HERE TO START A CASE WITH OUR CUSOMTER SERVICE DEPARMENT
Model
Nominal
steady-state
UV-A (365 nm)
intensity at
15 inches
(38 cm) ➀
Visible light
measurement
UV-A
coverage
area
(at minimum
2000 μW/cm2)
PM-1600UVH
High intensity,
with clear filter
8,000 μW/cm2
< 2 foot-candles
(22 lux)
15 in by 6 in
(38 cm x 15 cm)
PM-1600BLH
High intensity,
with black light filter
6,500 μW/cm2
< 1 foot-candle
(11 lux)
15 in by 6 in
(38 cm x 15 cm)
PM-1600UV
Standard intensity,
with clear filter
4,500 μW/cm2
maximum ➁
< 1 foot-candle
(11 lux)
15 in by 6 in
(38 cm x 15 cm)

 

 

Light Source: 16 UV-A (365 nm)

LEDs Lamp Style: Panel flood lamp

Dimensions: 5.5 x 13.75 x 6 in (14 x 35 x 15 cm) (W x L x H)

Weight: 9 lb (4 kg)

Power Requirement: AC power (main AC power cord  [8 foot (2.4m)] supplied with the unit) (Available in 120V, 230V, 240V and 100V versions)

 

 

All UV-A intensity readings were taken with Spectroline® AccuMAX™ Series meter, and are factory set to the values shown
To address aerospace industry concerns

NDT Catalog.pdf (639 KB)


 
BF-365PMBlack Light Filter Assembly
CF-100Clear Glass Filter Assembly
127918Particulate Air Filter
127956End Cap
CC-200Connector Cable for Ganging Lamps
CP-100Top Connecting Plate for Ganging Lamps Longitudinally
CP-200
Top Connecting Plate for Ganging Lamps Back-to-Back (Two Required)
CP-300Side Connecting Bracket for Ganging Lamps Longitudinally (Two Required)
UL-100Lens, UV LED, Long-Lasting, Spot
UVF-80Face Shield, UV-Absorbing
UVG-50Goggles, UV-Absorbing
UVS-30 Spectacles, UV-Absorbing