Because Spectroline’s new PowerMAX™ 365 UV-A LED flood lamp (PM-1600SBLC) comes fully loaded with compliances and mounting possibilities, it provides NDT technicians with a wide variety of application options. Along with its nominal steady-state UV-A intensity of 4,500 µW/cm² at 15 inches (38 cm), the latest PowerMAX 365 compliances include:
Rolls-Royce RRES 90061
ASTM UV-A intensity and wavelength specifications for LPI and MPI
(a certificate of conformance and full serialized validation report for both output and wavelength measurements is supplied with every lamp)
Poorly maintained equipment can leak more than fluids, it can leak money. Spectroline's LeakTracker™ (LT-300) is a powerful, economical leak detection flashlight that's ideal for all industrial fluid system applications.
LeakTracker has a high-output UV LED that delivers superior fluorescent dye response, making industrial leaks easier to spot. It works with all oil- and water-based fluorescent dyes, including difficult-to-fluoresce yellow, white and blue dyes-even in dirty fluids.
The Spectroline®MiniMAX™ UV-5G is the perfect compact lamp for a variety of laboratory applications, including UV sanitizing of disease-causing microorganisms and UV degradation studies.
The UV-5G model is a battery-operated, 5-watt, short-wave (254nm) UV lamp. It combines mini size with maximum power, making the lamp extremely portable and highly effective.
The UV-5G lamp weighs only 11 oz (312g) and measures just 9 x 2¼ x 1¼ in (22.9 x 5.7 x 3.2 cm). It comes with a wrist strap to reduce hand fatigue and can be easily slipped into a pocket for convenient transport.
Spectroline®TRITAN™ 365 Series are multi-LED, broad-beam UV-A (365 nm) lamps perfect for a wide range of NDT applications.
Each lamp features three ultra-hi-flux UV-A LEDs for NDT inspection, plus a white light LED to illuminate dark work areas. A rubber bumper with a Borofloat® glass lens protects the LEDs from damage. The lamps are compact and lightweight - only 16 ounces (454 g). Their rugged lamp bodies have an ergonomic design that provides hours of safe, fatigue-free use.
TRITAN 365 Series lamps are available in three versions to meet specific NDT inspection requirements.
The Spectroline®PC-8820B UV EPROM/Wafer Erasing System is engineered for maximum irradiance uniformity with a nominal initial short-wave UV intensity of 70,000 µW/cm², producing the quickest and most complete erasure of programmed memory. The erasing cycle time is as fast as 90 seconds.
The unit consists of eight, ozone-free, low-pressure mercury vapor quartz grid lamp assemblies mounted on specular aluminum reflectors that produce up to four times the throughput of competitive systems.
The cabinet's extra wide and deep drawer capacity ensures easy loading of wafers.
The Spectroline®TRITAN 365 (TRI-365SBLC) inspection lamp is now tested to comply with the ASTM E3022 Standard as well as being certified to meet Rolls-RoyceRRES 90061Requirements. It features three ultra-hi-flux UV-A LEDs for NDT inspection, plus a white light LED with an intensity of 400 foot-candles (4,306 lux) to illuminate dark work areas. The lamp produces a nominal steady-state UV-A intensity of less than 5,000 µW/cm2 at 15 inches (38 cm) and a large 4 inch (10 cm) diameter coverage area at 15 inches (38 cm), with a minimum UV-A intensity of 2,500 µW/cm2.
Spectroline’s Cool Seal™ A/C Leak Sealer is the hassle-free way to add years to out of warranty AC&R system. Cool Seal seals refrigerant leaks in compressors, condensers, evaporators, O-rings and hoses. And it’s now available in three popular delivery methods. The new kid on the block is the Cool Seal Stick Capsule (CS-3CS). It allows Cool Seal to be injected right along with your refrigerant (2 bleed valves required). Each capsule treats up to 2 tons of cooling.
The Spectroline®OPTI-LUX™ 365 leak detection flashlight provides pure UV light for optimal fluorescent dye response, making it ideal for all industrial fluid system leak applications. The flashlight works with all Spectroline™ oil-based fluorescent dyes: OIL-GLO® 22 (yellow), OIL-GLO® 30 (white), OIL-GLO® 33 (green), OIL-GLO® 40 (bright blue), OIL-GLO® 44 (yellow/green), OIL-GLO®
Leaks in air conditioning and refrigeration systems cost the industry millions of dollars every year. Most are discovered only after a loss of cooling leads to discomfort, spoilage or production difficulties. Spectronics Corporation manufactures a variety of kits to detect even the most elusive refrigerant leaks.
The Spectroline®OPK-40GS/E GLO-STICK®Kitcontains everything needed to locate all AC&R leaks in small to medium sized systems — including high-pressure R-410A systems.
Spectronics Corporation produces high-performance EPROM/Wafer erasing systems using state-of-the-art technology, ensuring the highest UV intensities, fastest erasing times and unmatched safety and reliability.
One such system is the Spectroline®PC-9920A UV EPROM/Wafer Erasing System; engineered to meet high-volume production requirements. It has an operating UV intensity that is up to 60% greater than competitors’ systems. Its nominal 254 nm irradiance of 70,000 µW/cm² over a 36 x 24 in (91.4 x 61 cm) erasing area ensures fast and complete erasure of programmed memory from every EPROM,