Skip directly to content

New NDT Inspection Lamp Now Tested to Comply with Both ASTM E3022 Standard and Rolls-Royce RRES 90061 Requirements

on Mon, 06/13/2016 - 13:50

The Spectroline® TRITAN 365 (TRI-365SBLC) inspection lamp is now tested to comply with the ASTM E3022 Standard as well as being certified to meet Rolls-Royce RRES 90061Requirements. It features three ultra-hi-flux UV-A LEDs for NDT inspection, plus a white light LED with an intensity of 400 foot-candles (4,306 lux) to illuminate dark work areas. The lamp produces a nominal steady-state UV-A intensity of less than 5,000 µW/cm2 at 15 inches (38 cm) and a large 4 inch (10 cm) diameter coverage area at 15 inches (38 cm), with a minimum UV-A intensity of 2,500 µW/cm2


A faceplate with integral black light filters reduces the output of wavelengths longer than 400 nm. Visible light emission is less than 1 foot-candle (5 lux). The unit’s long lasting UV-A lenses reduce the rate of solarization; a common problem with traditional lenses. When the thermal circuitry “senses” an overage in internal temperature, it trips, never letting the lamp go out of Rolls Royce RRES specifications. The lamp includes a rubber bumper with a Borofloat® glass lens to protect the LEDs from damage


A Certificate of Conformance and a full serialized validation report for both output and wavelength measurements are supplied with each lamp. The TRITAN 365 also meets ASTM UV-A intensity and wavelength specifications for LPT and MPT.


The TRITAN 365 comes with a choice of standard 8 foot (2.4 m) or extra-long 20 foot (6.1 m) heavy-duty power cord with AC plug, a rubber boot and UV-absorbing spectacles, all packed in a soft carrying case. It is available in 110V, as well as 230V, 240V and 100V versions.