Features state-of-the-art micro discharge light (MDL) technology with user-friendly design!

• Produces up to 10 times the UV-A output of conventional HID inspection lamps — steady-state UV-A intensity of 60,000 µW/cm˛ at 15 inches
• Works even in direct sunlight
• Integral bulb/reflector assembly
• Instant on/off/restrike
• Lightweight, solid-state ballast
• Pre-focused at the factory
• Virtually no emission of hazardous UV-B at 15 inches
• Less visible light output than competitive UV lamps
• Impervious to magnetic fields
• Stay-cool, impact-resistant and dent-proof housing
• Ergonomic design for fatigue-free handling

BATTERY-OPERATED VERSION

The Maxima 3500M includes a 12-volt, 7 A/hr rechargeable battery that will operate the lamp for 2 full hours. The DC battery pack can be attached to the ballast housing, making it easy to transport. This version can also be AC operated via an interchangeable power cord. A recharger is included. Both 120V & 230V versions are available and need one strap.

Optimal efficiency
The Maxima 3500 lamp's micro discharge light (MDL) technology produces a steady-state intensity of 60,000 µW/cm˛ at 15 inches (38cm) — up to 10 times the UV-A output of conventional HID inspection lamps. The high intensity of the Maxima 3500 lamp exposes even the smallest defects, cracks, flaws and leaks that previously evaded detection until they become major problems. As a result, inspections performed with Maxima 3500 are more comprehensive and accurate.

Safe handling
The Maxima 3500 lamp never gets hot. A special engineering polymer is used to make the lamp's housing and the contoured handle. In addition, the handle is positioned away from the housing. This allows the entire lamp to remain cool during use to protect against accidental burn injury.

Integral bulb/reflector assembly
When replacing the bulb or filter in competitors' lamps, exposed wiring can be a serious shock hazard due to residual current. To eliminate this risk, the Maxima 3500 lamp's bulb/reflector assembly is designed as a single integral unit with "unexposed" circuitry. The unique design also makes bulb replacement easy (a new bulb/reflector unit can be installed with just a 1/4 turn). This helps maintain the original output level by providing the benefit of a new reflector whenever the bulb is replaced.

Unique diffusing filter available
Due to the ultra-high UV-A intensity of the Maxima 3500 lamp, UV fade of fluorescent penetrants will occur within the "hot spot" of the beam after prolonged exposure. The 2F350 diffusing filter, available as an accessory, will effectively diffuse the hot spot over a broader area and will significantly lengthen the time before UV fade occurs.

Prefocused bulb
The bulb/reflector used in the Maxima 3500 is prefocused at the factory to ensure peak performance. This prevents the loss of output power that may occur due to incorrect, off-center bulb installation during bulb replacement.

Resistant to magnetic field
Interference from magnetic fields can shut off conventional HID lamps, causing frustrating warm-up delays before restart. The Maxima 3500 lamp is not affected by magnetic fields and thus offers the advantage of continuous, uninterrupted inspection process.

Virtually no emission of hazardous UV-B
The Maxima 3500 emits virtually no emission of hazardous UV-B light, unlike competitive units which have substantial UV-B light emission.

Instant on/off/restrike
The Maxima 3500 lamp's solid-state ballast offers "instant on" capability. This eliminates waiting for warm up and saves valuable time. The ballast also protects against voltage fluctuations that can affect the lamp's performance.

Super rugged and shock resistant
The lamp head and housing are constructed of a tough engineering polymer to protect against dents, cracks and scratches. To reduce shock hazard, the Maxima 3500 comes equipped with a 5-wire secondary cord and fully enclosed ballast.

Lightweight, portable, ergonomic design
The lamp head measures only 7 1/2 inches (19cm) long and weighs just 2 1/2 lbs (1.1kg). The entire unit, including the ballast, weighs 6.1 lbs (2.8kg). The power cord exits directly from the bottom of the contoured pistol-grip handle, resulting in better balance. An on/off switch is conveniently positioned on the handle. The primary and secondary cords are both 8-feet (2.5m) long.

Easy maintenance
Flexible, silicone-rubber filter holder can be removed easily without tools for bulb/reflector or filter replacement.

FREE UV-absorbing glasses are included with every lamp.